Need advice (Fuel related) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BaggedC10 · 02-06-2003, 01:11 AM

How in the he!! are you supposed to install new hoses from the passenger tank/hardline from the diverter valve? Is there anyway I can loosen the hose up a bit? I already installed two ends at the sending unit, but I cut one hose too short. Now, I can't remove the ends because they are so tight! I have already removed the tank 4-times this week and would like to avoid doing that yet again. Thanks for any suggestions.

P.S.-I know you have to remove the squeeze clamps before the hose will come-off, but I have already done that...........obviously.

02-06-2003, 01:11 AM	#1
BaggedC10 Under construction! Join Date: Aug 2002 Location: NorCal Posts: 1,065	Need advice (Fuel related) How in the he!! are you supposed to install new hoses from the passenger tank/hardline from the diverter valve? Is there anyway I can loosen the hose up a bit? I already installed two ends at the sending unit, but I cut one hose too short. Now, I can't remove the ends because they are so tight! I have already removed the tank 4-times this week and would like to avoid doing that yet again. Thanks for any suggestions. P.S.-I know you have to remove the squeeze clamps before the hose will come-off, but I have already done that...........obviously. __________________ 2001 Silverado bagged on 22's. Sold



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.