Two-piece drive shaft needs a home... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**COBALT** · 07-04-2008, 03:43 PM

I simply can't take this to the junk yard. I've seen these sold on the board more than once, so I know how popular they can be. I can't store it, and I don't need it.

Update:

I did some work to remove the U-joints, and did some wire brushing and cleaning on the yokes - specifically the slip yoke. This driveline is in super good shape. I'm definitely not taking this to the junk yard.

I'm going to ask shipping cost + $20. Please include your zipcode so I can determine the shipping.

It will need:

New U-joints
New Center support bearing
Balancing (once it's back together)

Let me know if you're interested.

07-04-2008, 03:43 PM	#1
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	Two-piece drive shaft needs a home... I simply can't take this to the junk yard. I've seen these sold on the board more than once, so I know how popular they can be. I can't store it, and I don't need it. Update: I did some work to remove the U-joints, and did some wire brushing and cleaning on the yokes - specifically the slip yoke. This driveline is in super good shape. I'm definitely not taking this to the junk yard. I'm going to ask shipping cost + $20. Please include your zipcode so I can determine the shipping. It will need: New U-joints New Center support bearing Balancing (once it's back together) Let me know if you're interested. Attached Images __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA. Last edited by COBALT; 07-05-2008 at 04:16 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.