need help for a clutch assembly - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sickchevy68cst · 07-09-2008, 03:43 PM

well heres the problem i ordered a mcleod hydraulic clutch unit (nice unit) with throwout bearing and slave cylinder.. where the stock clutch is mounted i have to cut into wat looks like the steering column support braces on the firewall. i still have the clutch bar from the pedal down the zbar but thats it. i just did a motor swap from a tired 350 to a 73-76 454 but the 454 still has the bolt holes for a zbar mount should i drill into the brace or pull out my trans and put the mechanical back in it.. and if i do put the mechanical back in where do i get a whole lower clutch assembly

any help would be very thankful

Neil

07-09-2008, 03:43 PM	#1
sickchevy68cst Rice Killing 101 Join Date: Feb 2008 Location: aliso viejo California Posts: 107	need help for a clutch assembly well heres the problem i ordered a mcleod hydraulic clutch unit (nice unit) with throwout bearing and slave cylinder.. where the stock clutch is mounted i have to cut into wat looks like the steering column support braces on the firewall. i still have the clutch bar from the pedal down the zbar but thats it. i just did a motor swap from a tired 350 to a 73-76 454 but the 454 still has the bolt holes for a zbar mount should i drill into the brace or pull out my trans and put the mechanical back in it.. and if i do put the mechanical back in where do i get a whole lower clutch assembly any help would be very thankful Neil __________________ distrubin the peace since i got the thing and broke the origianl radio on 95.5 classic rock Ride: 1968 c20 lwb 327(orig motor)/np435/eaton 4.10 w/posi puttin in a 496 rebuilding trans need to rebuild diff :\| need to start takin pics and start a project thread



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.