Tilt lower bearing removal - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70LonghornCST · 07-18-2008, 01:32 PM

I just bought a Tilt steering column from a 1970 GM truck. I did a "search" here and found many posts on columns, but could not find one on this exact aspect: bearing removal.

When I turn the mast I can hear a grinding sound like there is dirt or metal bits in the lower bearing. I have ordered a new lower tilt bearing and plastic housing. But, how do you remove the bearing from the shaft (mast)? I know there is a metal clip and bearing retainer, but after those are removed, how does one proceed to
remove the bearing from the shaft? I just don't want to mess anything up. Please enlighten me!

Thanks!
-Richard

07-18-2008, 01:32 PM	#1
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Tilt lower bearing removal I just bought a Tilt steering column from a 1970 GM truck. I did a "search" here and found many posts on columns, but could not find one on this exact aspect: bearing removal. When I turn the mast I can hear a grinding sound like there is dirt or metal bits in the lower bearing. I have ordered a new lower tilt bearing and plastic housing. But, how do you remove the bearing from the shaft (mast)? I know there is a metal clip and bearing retainer, but after those are removed, how does one proceed to remove the bearing from the shaft? I just don't want to mess anything up. Please enlighten me! Thanks! -Richard __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.