A few questions about a 4x4 conversion

[msgross]

Originally Posted by Sinisterspeed

using a 10 bolt in the first place is something I would never do anyway. ....HEY if you want a 35 dollar axle in your truck go ahead forgive me trying to offer any advise.

you know what they say about opinions... everyone's got one.


I have no reason to spend $1500 for a dana60/14 combo. As far as a dana 44 1/2ton and 3/4 ton then your only difference is the spindle, bearings and hubs. axles and steering components are all the same and basically the same as the 10 bolt...


good luck zeusflash with your truck build and the body swap whichever way you decide to roll with it. It will all work anyway...