Dart Heads & 383 fs

[70GMCer]

I'm parting out this 200 mile 383. I switched back to a stock 350 & don't need these parts. These items are for pickup only, NO SHIPPING. Please don't ask for shipping. I"m going to post here first before putting these on a local Craig's List.

All these items have about 200 miles total on them. The prices are firm.

Dart Iron Eagle Heads, 200cc runners, 2.02/1.60 stainless valves, 3/8" studs w/plates, 72cc chambers, Comp Cams springs, Procomp 1.5 & 1.6 full rollers with locks, w/harden generic ARP bolts, Moroso valley pan cover. $450 or $400 without the rollers, pan & bolts.

1973 Chevy 010 block, 4 bolt mains, 30 over, all machine work has been done for 383. Again, only 200 miles on this engine. Still has the cross hatching hone marks on the cylinders. Has balanced Eagle steel crank, rods w/arp bolts, Speed pro hyper pistons w/full floating pins. Crane 272H cam with lifters, Melling standard oil pump. Comes with external balanced flexplate & balancer. $500

I will sell the completed rotating assembly & the block separate. $275 for the block & $350 for the rotating assembly.

I live right off I-95, 25 miles north of Baltimore, Md.

I have $450 in block work alone.

Again, This must be picked up. If someone buys just the heads, I will ship the rollers, pan & bolts. I will post if the rollers are available separate.