|
10-08-2008, 05:14 PM
|
#1 |
|
Special Order
  
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,862
|
Little by Little
Last year I replaced the front wheel bearings on my`72 K2500 because one was bad.It`s had a good bit of free-play since I bought it.There was still verticle play so this summer I replaced the ball joints.It still has free-play in the steering so I checked while someone turned the wheel.The sector shaft has play at the bushing where it comes out of the box.Time for a rebuild or new steering gear.I decided to use one I`ve had around for a good while.I ordered it for a truck that I was going to do a ground-up like-new resto on that never happened.So...it`s going on my driver.
  The blue truck I sold last summer had all the front end and brakes tip-top.This one has always needed alot of work in those areas because when I bought the blue one it needed everything just to be driveable.So,it went ahead of the GMC.I did the front brakes,master cyl,and booster when I did the front bearings.I just did the rear brakes back in the spring.So,little by little I`ll have this thing trackin`straight and stoppin`square. Next,springs and shocks,then tires.
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 10-08-2008 at 05:21 PM. |
|
|
| Bookmarks |
|
|
Threaded Mode