Power Brake Mstr Cyl / Booster Angle - Too Much? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mole2000 · 10-18-2008, 02:14 PM

I just finished getting the new power brake master cylinder booster installed. I looked at a couple of other swap threads on the board, and mine looks like it's angled pretty far down to the front. Is that the correct orientation? It's also a bit off side to side as if it was twisted. That could be due to the pedal hanger being a bit messed up. Any ideas on whether to continue or do I need to look for something wrong?
Thanks.

10-18-2008, 02:14 PM	#1
mole2000 Registered User Join Date: Aug 2008 Location: Austin, Texas Posts: 78	Power Brake Mstr Cyl / Booster Angle - Too Much? I just finished getting the new power brake master cylinder booster installed. I looked at a couple of other swap threads on the board, and mine looks like it's angled pretty far down to the front. Is that the correct orientation? It's also a bit off side to side as if it was twisted. That could be due to the pedal hanger being a bit messed up. Any ideas on whether to continue or do I need to look for something wrong? Thanks. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.