best rear-end gear for TH-700R4/28" tire combo? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

glock35ipsc · 11-03-2008, 02:16 PM

My 68 currently has a 3.08 rear gear as I was originally going to run a TH-350. Now I am going to use a TH-700R4 and was wondering if I should stick with the 3.08, or go with 3.73, or even 4.11? I have read on some other forums that 4.11 would be too much with the 3.06 1st gear of the 700R4.

I am running a mostly stock 350 crate motor with a small Comp Cams stick, a 600 Edelbrock, and a 28" rear tire. Since it is not a hot motor, I just want good bottom end (for the motor I have) and good highway driveability.

11-03-2008, 02:16 PM	#1
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	best rear-end gear for TH-700R4/28" tire combo? My 68 currently has a 3.08 rear gear as I was originally going to run a TH-350. Now I am going to use a TH-700R4 and was wondering if I should stick with the 3.08, or go with 3.73, or even 4.11? I have read on some other forums that 4.11 would be too much with the 3.06 1st gear of the 700R4. I am running a mostly stock 350 crate motor with a small Comp Cams stick, a 600 Edelbrock, and a 28" rear tire. Since it is not a hot motor, I just want good bottom end (for the motor I have) and good highway driveability. __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.