![]() |
![]() |
#1 |
Gearhead
Join Date: Jan 2008
Location: Colorado
Posts: 1,193
|
![]()
Hello everyone, I am fairly new to the forum, but wanted to show some pics of my build up. I am strating this kinda late, but I will try to get you up to speed.... Hope you enjoy, any comments, suggestions, etc are appreciated.
First pics are of the truck (72' C10) after I lowered it and put some 18's on it, also with a the new (68') fleetside bed that I put in place of the original step side bed, wish I had kept that bed too... Oh well I used Early Classic's complete rear kit, Firestone sleeve over type air bags, their shock relocators and super track bar kit. I powdercoated a decent set of factory trailing arms and installed them with urethane bushings. I used belltech Nitro Drop shocks on all four corners. the front was lowered with DJM 3" drop UCA's and LCA's. I also installed new pitman/idler arms, and inner/outer tie rods and adjuster sleeves. ![]() ![]() These are the 18" Hot Wheels (Discount brand) and Nitto rubber ![]() Here is what the frame looked like when I started ![]() ![]() The original stepside bed that was on the truck when purchased. ![]() ![]() Last edited by 6772owner; 02-18-2009 at 10:25 PM. Reason: text |
![]() |
![]() |
Bookmarks |
|
|