Looking for a 67-68 Hood and D/S Door - The 1947 - Present Chevrolet & GMC Truck Message Board Network

myoldchevytruck · 11-12-2008, 09:19 AM

Hey All you Florida Folks.

I'm looking for a hood for a 67'-'68 in decent shape. My hood is toast. Every time I slam the hood, rust....lots of rust. I'm also looking for a D/S Door. The PO decided to weld the top hinge (luckily it was welded to the door and not the body).

I live in the Ft. Lauderdale/Miami Area. I'm going to the Turkey Run in Daytona during the Thanksgiving W/E so Orlando/Tampa/Ft. Meyers/Naples or anywhere between to Ft. Lauderdale would be fine.

Pictures and prices would be great. Due to high shipping cost, pickup would be preferred. Thanks, Harry

11-12-2008, 09:19 AM	#1
myoldchevytruck Retired Air Force Veteran Join Date: Aug 2007 Location: Pembroke Pines, Florida 33024 Posts: 1,808	Looking for a 67-68 Hood and D/S Door Hey All you Florida Folks. I'm looking for a hood for a 67'-'68 in decent shape. My hood is toast. Every time I slam the hood, rust....lots of rust. I'm also looking for a D/S Door. The PO decided to weld the top hinge (luckily it was welded to the door and not the body). I live in the Ft. Lauderdale/Miami Area. I'm going to the Turkey Run in Daytona during the Thanksgiving W/E so Orlando/Tampa/Ft. Meyers/Naples or anywhere between to Ft. Lauderdale would be fine. Pictures and prices would be great. Due to high shipping cost, pickup would be preferred. Thanks, Harry __________________ Harry 69' SWB Step Side 1/2 Ton w/68' Front Clip Swap from Leafs to Trailing Arms (Complete) Swap 6 Lug to 5 Lug (w/ Disk Brakes in Front) 3/6 Drop Help Support The Board Click Here For Information On How To Subscribe Krue's FAQ Page Vendors Last edited by myoldchevytruck; 11-12-2008 at 09:44 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.