Back up light question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Nima · 11-22-2008, 10:52 PM

should back up lights have ground connections? I am rewiring the whole truck and doing some upgrade at the same time: front HID llights and real LED lights and so on. When I took the rear light assemblies out, there is only one wire going in to the back up lights.
By the way, I am using painless systems. Some good things and some surprises, for example, some of my original wires seems to be bigger than painless ones, also some parts of the under the dash harness are short! specially the heater part. But it is a ver well explained system specially for somebody like me with close to nothing knowledge of wiring.

11-22-2008, 10:52 PM	#1
Nima Blue 67 Join Date: Apr 2004 Location: Western WA Posts: 1,179	Back up light question should back up lights have ground connections? I am rewiring the whole truck and doing some upgrade at the same time: front HID llights and real LED lights and so on. When I took the rear light assemblies out, there is only one wire going in to the back up lights. By the way, I am using painless systems. Some good things and some surprises, for example, some of my original wires seems to be bigger than painless ones, also some parts of the under the dash harness are short! specially the heater part. But it is a ver well explained system specially for somebody like me with close to nothing knowledge of wiring. __________________ 1953 GMC 3/4 ton: current project 1967 C20: 5.3 voretc with T5 conversion, 4 wheel 8 lug disc brake 1972 Nova: my 4 door sport sedan! 5.3 voretc + T5 conversion. drivable project, FUN!! 1979 Camaro Z28: 5.3 vortec conversion with build TH350: drivable project, Fun to drive 1992 Camaro RS convertible (Z28 clone): 5.3 conversion with build T5: on going project 2005 Silverado 2500, 4x4 Duramax, original owner



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.