Turn signal switch / wheel lock removal tool FYI - The 1947 - Present Chevrolet & GMC Truck Message Board Network

pkbinplano · 11-23-2008, 01:45 PM

FYI if your replacing your turn signal switch, or rebuilding your column, Auto Zone has GM tool part number J2365-A, under tool number 27044 for $15. This is a must when removing and installing the wheel lock plate, as a big spring must be compressed when removing/installing a snap ring. They also have the turn signal switch for $25. Got as far as getting down to the switch, then put it back together untill next weekend. PS my switch has a broken return spring, and no, the new springs on the new switch isn't the same. Was going to just swap a spring. LOL

11-23-2008, 01:45 PM	#1
pkbinplano pkbinplano Join Date: Nov 2002 Location: Plano Texas Posts: 370	Turn signal switch / wheel lock removal tool FYI FYI if your replacing your turn signal switch, or rebuilding your column, Auto Zone has GM tool part number J2365-A, under tool number 27044 for $15. This is a must when removing and installing the wheel lock plate, as a big spring must be compressed when removing/installing a snap ring. They also have the turn signal switch for $25. Got as far as getting down to the switch, then put it back together untill next weekend. PS my switch has a broken return spring, and no, the new springs on the new switch isn't the same. Was going to just swap a spring. LOL __________________ http://www.picturetrail.com/gallery/...7496&members=1 84 chevy silverado aka The Bananna Boat



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.