Need some help from bucket seat gurus!!!!

[sameyrasmea72]

Need some help from bucket seat gurus!!!!
Here is my situation I am in the process of making some attachment brackets for bucket seats that go on the under side of the cab floor.

The ones in the pic below were made by this guy while I waited. The final ones should be near exact. I took the original ones off a bucket seat cab without doing much damage to the cab that was a complete truck to be sold.

Now for my problem. I need one more bracket that I could not get off of this truck without really messing up the cab. It is the long brace that stretches from the bolt hole on the front inside of the drivers side bucket seat to the front inside bolt hole of the passenger side. This is probably worded funny but I hope you get the idea.

Is there anybody out there who has a trashed factory bucket seat cab that could cut out this brace for me. I know some one had a floor section awhile back, but I missed it. You would not have to remove the brace from the floor itself, I can do that. Just cut out the entire floor section brace and all. I think it is about 18 inches.


I will be making several sets of these Just incase there are other fanatics like me out there.
Sorry for the long post…..Jason