Motor Options (Need Opinions) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

pat123 · 12-21-2008, 10:50 PM

Well i am planning on rebuilding my engine. Its a stock 307 with a turbo 400 behind it. I am planning on putting an Edelbrock carb (650cfm, electrice choke) with a high rise Edelbrock manifold. I am also planning on put a double roller timing chain, cam (with a little more duration and lift), lifters, valves, and valve springs. I was wondering what your thoughts, addvice, options were? Also if i should change the heads while im at it? I know theirs going to be alot of different opinions but im interested in hearing all of them.

Pat

12-21-2008, 10:50 PM	#1
pat123 Pat Join Date: Jan 2008 Location: canada, bc Posts: 243	Motor Options (Need Opinions) Well i am planning on rebuilding my engine. Its a stock 307 with a turbo 400 behind it. I am planning on putting an Edelbrock carb (650cfm, electrice choke) with a high rise Edelbrock manifold. I am also planning on put a double roller timing chain, cam (with a little more duration and lift), lifters, valves, and valve springs. I was wondering what your thoughts, addvice, options were? Also if i should change the heads while im at it? I know theirs going to be alot of different opinions but im interested in hearing all of them. Pat



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.