|
01-02-2009, 07:40 PM
|
#1 |
|
Ephesians 2:8
Join Date: Mar 2008
Location: Delavan, IL
Posts: 677
|
79 Big 10 lowering
ok, this past week, I have been messing around with ride hieght on my 79. It is a Big 10. I removed some leafs in the rear, and put on 2" drop coils. The rear is way to loosy goosy right now, planning to add back in the thicker leaf and remove another.
My question falls with the front end. Is the Big 10 not a "3/4 ton" coil spring? Sitting 1.5 - 2" higher than a non heavy half? So putting the 2" drop coils on, it only dropped 1.5-2"..... Whats the deal with that? If my truck sits 1.5-2" higher in the front than a non heavy half, wouldn't a 2" drop coil put me down at least 2.5-3"? The first picture is a before, and the second is current. Is it possible that a Big 10 has a spindle that sat the truck up a little higher? What are your thoughts?  
__________________
72 Suburban making it mine My 79 C10 story 79 C10 LS swap 94 LS swapped Daily Driver Tahoe Limited Instagram - @piersonclassics 83 K20 Farm Truck Build Last edited by bowtieguy79; 01-02-2009 at 07:48 PM. |
|
|
| Bookmarks |
|
|
Threaded Mode