![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#1 |
"THE GREEN GOBLIN"
Join Date: Mar 2008
Location: Fremont Ca.
Posts: 1,025
|
![]()
What are you guys useing For the LOWER HOSE Part Numbers Purchase place Ext?? The origanal Hoses will not work.
I have a 72 chevy C-10 454BB with an Electric Water Pump the best hose I found was for a 1975 BB Chevy Truck The curves are a perfect match the part that goes on the water pump is a perfect fit... BUT THE PART OF THE HOSE THAT GOES ON THE RADIATOR IS A BIT TOO SMALL IT SEEMS TO BE THE SAME SIZE AS THE Radiator OUTLET ITS A VERY VERY TIGHT FIT IT TOOK ME A LONG TIME TO GET IT TO FIT I LUBERICATED THE END OF THE HOSE AND WITH A LOT OF STRUGGLEING I FINALY GOT IT TO A SPOT TO PUT A CLAMP ON IT, BUT THIS FOR SOME REASON DOESN'T LOOK GOOD TO ME OR SAFE NOW THAT I THINK OF IT.... Please guys who has this simular setup and what are you guys using.... 454BB Th400 No/AC 3Core Radiator with Transmission Cooler, And Thanks again for your help.... Pablo
__________________
![]() "THE GREEN GOBLIN" 1972 Cheyenne 10 Short Fleet Side Front 2.5inch Spindles with 2inch Springs Rear 4inch drop Springs. 454BBC TH400,Posi 1971 Cheyenne 10 Long Fleet Side 454BBC TH350,Posi ![]() Drive it like you stole it! ![]() Petey-pablo@sbcglobal.net Last edited by petey-pablo; 01-12-2009 at 08:48 AM. |
![]() |
![]() |
Bookmarks |
|
|