Need some help here, please.. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Albatrossian · 01-13-2009, 08:38 PM

The time has finally come for me to replace the dead 700R4 in my truck. I'm going to be swapping it with a short tail TH350 which is 3" shorter. When I called to check the prices to have my driveshaft lengthened, they quoted me a price around $200 to have the work done. But, since the LWB driveshafts are longer, having one cut down will be far cheaper.. about $35. Does anyone have a measurement of a LWB shaft they can give me so I can hunt one up in a yard? And maybe the width of the yoke on the welded end? I've got a 10-bolt rear, if that helps..
Thanks!

01-13-2009, 08:38 PM	#1
Albatrossian Georgia Boy Join Date: Jun 2008 Location: Douglas, Georgia Posts: 370	Need some help here, please.. The time has finally come for me to replace the dead 700R4 in my truck. I'm going to be swapping it with a short tail TH350 which is 3" shorter. When I called to check the prices to have my driveshaft lengthened, they quoted me a price around $200 to have the work done. But, since the LWB driveshafts are longer, having one cut down will be far cheaper.. about $35. Does anyone have a measurement of a LWB shaft they can give me so I can hunt one up in a yard? And maybe the width of the yoke on the welded end? I've got a 10-bolt rear, if that helps.. Thanks! __________________ 81 GMC High Sierra, 2WD, 357ci/700R4, 3.73s, posi.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.