Engine Analyzer and Drag Analyzer.. Willing to put your info in.

[gchemist]

Do mine do mine do mine!!

Engine info
http://www.gmperformanceparts.com/En...9712&engCat=sb
ZZ4
4.00 Bore
3.48 Stroke
Factory tolerances
Reverse rotation stock serpentine water pump
Dual LS1 fans

Head data:
1.94 intake / 1.50 exhaust
Cylinder head part number: 12256463 - L98 Corvette head
Cylinder head type: aluminum : 58cc chambers
Compression: 10:1

Dual plane: RPM air gap intake
Edelbrock 1406 mechanical secondaries (1407 avaliable too)

Header Data:
¾ length Chevelle 2.5 tube
¾ length header
X-pipe, dual Magnaflow exhaust, not cats
Cam info: Duration at .050": 208 degree intake / 221 degree exhaust
Total Lift and based on what rocker ratio: 1.5 ratio
Intake centerline: 208 degree intake / 221 degree exhaust
.474 intake / .510 exhaust
What rocker are you using? Stock ZZ4 rocker

Blower/turbo?
Dual snorkel 4” ram air box

Vehicle Data:
Total weight: 4200
Front/Rear weight bias : C10 – 83
What trans you are running: 700R4
Size converter (STR if you have it): 2500
Gear ratio:3.08 ratio
Differential: open
Tire size: 255/60R15