1964 Chevy c-10 build "Carla Marie"

[daveodom]

Originally Posted by MrPhotographer06

wow.. will those nissan titan wheels fit a stock truck?

The wheels bolted right up on the front. Same bolt pattern. On the back I had to machine a counter bore to clear the axle shaft. Wheels are 20x8 and have a 5 1/2" backspacing. Lets me run the stock rear axle and clear the bed sides at full drop.

Once I get the front clip off the C60 I'll mock it up on my 1/2 ton. I have a 63' grill and would like to keep the lettering above the grill.

Also, pic of the truck at ride height. About 3 1/2" off the ground. Max height should be around 7" to 8" off the ground.