Photos Wanted of GM Cruise Installs - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**DANTIP** · 01-25-2009, 11:08 AM

Wanted!

1) I would love to see photos of the cable routing/support from the servo to the carb.

2) Would also like to see photos of the penetration(s) through the firewall for the vacuum-break tube, speedo cable, and wiring. Directions show one penetration but it looks tough to get three things through one grommet.

3) Lastly a photo of the vacuum source at the intake-manifold fitting.

The more photos the better!

Thanks!!!

01-25-2009, 11:08 AM	#1
DANTIP Registered User Join Date: Sep 2001 Location: Fort Wayne, Indiana, USA Posts: 1,882	Photos Wanted of GM Cruise Installs Wanted! 1) I would love to see photos of the cable routing/support from the servo to the carb. 2) Would also like to see photos of the penetration(s) through the firewall for the vacuum-break tube, speedo cable, and wiring. Directions show one penetration but it looks tough to get three things through one grommet. 3) Lastly a photo of the vacuum source at the intake-manifold fitting. The more photos the better! Thanks!!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.