Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
01-26-2009, 04:03 PM | #1 | |
Senior Member
Join Date: Feb 2001
Location: New Madison, Ohio
Posts: 21,372
|
FS: Big Block Chevy Milodon Oil Pan Melling Pump & Gasket - $90 plus the ride.
http://store.summitracing.com/egnsea...5&autoview=sku
I bought this off 1968SWBBigBlock and have since decided to not use it on the Circuit Rider so it is up for sell. Total new from Summitt is over $200.00 *Milodon Oil Pan Part Number MIL-30710 Cost $112.00 *Milodon pick up tube Part Number MIL-18610 Cost $18.00 *Melling part number M77HV Oil Pump Cost $35.00 *Fel-Pro 1884R oil oan gasket Cost $38.00 Oil Pan Gasket, 1-Piece, Rubber/Steel Core, Chevy 1966-90, Big Block All of these parts are used - the oil pump has about 600 miles on it, the pan, pickup and gasket less than 200 miles The pan has some scratches but no dents or dings, the oil pump held 64 psi, the pan gasket is a reusable style with a steel core to eliminate over torquing of the pan & gasket, the pickup tube is welded to the pump to keep it from falling off, this is the correct way to install a pump tube & we measured for correct clearance between the bottom of the pan and the pick up prior to welding it.. Quote:
No pics as its all out in the garage and I don't want to go out and unbox it all. Info can be seen at the Summitt link. Thanks
__________________
A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder! Last edited by 70cst; 01-26-2009 at 04:09 PM. |
|
Bookmarks |
|
|