Carb & ring & pinion - The 1947 - Present Chevrolet & GMC Truck Message Board Network

slugish · 02-25-2009, 09:41 PM

Have 2 650 double pumper Holley Carbs : one Itook off my truck with approx. 7-8k miles > replaced with a 750 cfm . Will sell both for 225.00 . The one I TOOK OFF WAS running fine & the other one was traded to me ( NEVER RAN IT ) oNE iTOOK OFF was bought new from summitt for around 400.00 ( with shipping & handling ) I did replace the power valve in it . the price includes shipping & handling.

the other is a richmond gear ring & pinion 3:73 ratio for a 10 bolt rear in a 84 2 wheel drive c-10 . posted this on the 73-87 parts board as well . I AM unsure if this will work in your stock 67-72 rears . Paid approx. 175.00 for it - reasoin for selling > was too low for me with a 3 speed turbo 350 trans. Probably didnt run it over 1000 miles ( like new ) 125.00 - includes shipping & handling.

02-25-2009, 09:41 PM	#1
slugish Slugish Join Date: Jan 2005 Location: Earlysville, Va. Posts: 1,024	Carb & ring & pinion Have 2 650 double pumper Holley Carbs : one Itook off my truck with approx. 7-8k miles > replaced with a 750 cfm . Will sell both for 225.00 . The one I TOOK OFF WAS running fine & the other one was traded to me ( NEVER RAN IT ) oNE iTOOK OFF was bought new from summitt for around 400.00 ( with shipping & handling ) I did replace the power valve in it . the price includes shipping & handling. the other is a richmond gear ring & pinion 3:73 ratio for a 10 bolt rear in a 84 2 wheel drive c-10 . posted this on the 73-87 parts board as well . I AM unsure if this will work in your stock 67-72 rears . Paid approx. 175.00 for it - reasoin for selling > was too low for me with a 3 speed turbo 350 trans. Probably didnt run it over 1000 miles ( like new ) 125.00 - includes shipping & handling.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.