A Pulley thing - The 1947 - Present Chevrolet & GMC Truck Message Board Network

seekhunt · 02-26-2009, 02:20 AM

Does anyone have a part number for the power steering pulley which goes on the pump? It needs to fit a 1967 327. The pump mounts in a cradle on the front lower drivers side of the block, there is also a bracket to support it out the back which attaches to the drivers side isolator pad (motor mount). The pump is the round bodied style with the filler neck attached. The pulley is keyed and is held on by a nut. The depth from the back of the mounting boss to the back of the shive needs to be 3/8". (put a tape measure against the back of the pulley hole and eyeball across the back of the disc). My harmonic balancer is correct 283/327 (small). Thanks for looking, Pete

02-26-2009, 02:20 AM	#1
seekhunt Registered User Join Date: Jan 2009 Location: Courtenay B.C. Posts: 15	A Pulley thing Does anyone have a part number for the power steering pulley which goes on the pump? It needs to fit a 1967 327. The pump mounts in a cradle on the front lower drivers side of the block, there is also a bracket to support it out the back which attaches to the drivers side isolator pad (motor mount). The pump is the round bodied style with the filler neck attached. The pulley is keyed and is held on by a nut. The depth from the back of the mounting boss to the back of the shive needs to be 3/8". (put a tape measure against the back of the pulley hole and eyeball across the back of the disc). My harmonic balancer is correct 283/327 (small). Thanks for looking, Pete



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.