Engine Buildup Time! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

keith61760 · 02-28-2009, 02:42 AM

Well after about 2 mos of the 77 C-10 engine starter mount breaking off, the truck is about to come back to life. Fed Ex just dropped off an Edelbrock carb 1806, Edelbrock Intake 7516 and a new seal kit. I got a GM Targetmaster 350 crate motor from a buddy with about 25k miles on it and a 7102 Edelbrock Cam with springs and another buddy hooked me up with a set of Vortec heads. So with any luck this week should be some fun and the truck back on the road.

Also picked up a 78 4wd. Gave my buddy the axles and suspension and I will eventually put the stepside on my truck. The black 85 in the pic is now off the frame and my roommate is starting to put that together.

02-28-2009, 02:42 AM	#1
keith61760 Registered User Join Date: Jul 2008 Location: Lemoore, Ca Posts: 161	Engine Buildup Time! Well after about 2 mos of the 77 C-10 engine starter mount breaking off, the truck is about to come back to life. Fed Ex just dropped off an Edelbrock carb 1806, Edelbrock Intake 7516 and a new seal kit. I got a GM Targetmaster 350 crate motor from a buddy with about 25k miles on it and a 7102 Edelbrock Cam with springs and another buddy hooked me up with a set of Vortec heads. So with any luck this week should be some fun and the truck back on the road. Also picked up a 78 4wd. Gave my buddy the axles and suspension and I will eventually put the stepside on my truck. The black 85 in the pic is now off the frame and my roommate is starting to put that together. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.