power steering adapter for a 68 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

drivethechevy · 03-01-2009, 09:55 PM

i have read a few places on the board about some 67-68's having a difference on the frame and that adapters are needed to acomodate a power steering gearbox, on my 68 powersteering box is shimmed out as a fix but is done really poorly, and whoever bolted it in got lazy and only botled half of it to the frame anyway

what i would like to know is there a kit or a method to give a 67-68 with a flat frame the ablity to have power steering safely, if there is where could i find such a kit or how would i make one?
thanks in advance
nate

03-01-2009, 09:55 PM	#1
drivethechevy Registered User Join Date: May 2007 Location: Buffalo MN Posts: 606	power steering adapter for a 68 i have read a few places on the board about some 67-68's having a difference on the frame and that adapters are needed to acomodate a power steering gearbox, on my 68 powersteering box is shimmed out as a fix but is done really poorly, and whoever bolted it in got lazy and only botled half of it to the frame anyway what i would like to know is there a kit or a method to give a 67-68 with a flat frame the ablity to have power steering safely, if there is where could i find such a kit or how would i make one? thanks in advance nate __________________ Trial and Error, its expensive but its a mistake i most likely wont make again 1971 chevy k10 custom deluxe http://67-72chevytrucks.com/vboard/s...d.php?t=341257 1968 chevy k/10 fleet http://67-72chevytrucks.com/vboard/s...d.php?t=334731 1948 desoto custom coupe fluid drive(family heirloom)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.