Another machining request - The 1947 - Present Chevrolet & GMC Truck Message Board Network

XXL · 03-07-2009, 05:59 PM

Anyone interested in machining a dash bezel for me? I'm looking to machine a semi-stock "idiot light" style bezel with a few mods. It needs to be able to rear mount the stock gauges (I imagine this can be as simple as a few staunchions in the right place to align with the factory gauge unit holes or as intricate as a machined indentation where the gauge unit sits in).

I have access to some intermediate CAD drawings (see 3D models below courtesy of Slammed67), but a couple of the dims aren't yet firmed up.

If you do this kind of work or know someone who does, please PM. I'm aware of the several aftermarket offerings in this area but they don't quite meet my very specific needs.

03-07-2009, 05:59 PM	#1
XXL Señor Member Join Date: May 2002 Location: Edge of the world Posts: 5,367	Another machining request Anyone interested in machining a dash bezel for me? I'm looking to machine a semi-stock "idiot light" style bezel with a few mods. It needs to be able to rear mount the stock gauges (I imagine this can be as simple as a few staunchions in the right place to align with the factory gauge unit holes or as intricate as a machined indentation where the gauge unit sits in). I have access to some intermediate CAD drawings (see 3D models below courtesy of Slammed67), but a couple of the dims aren't yet firmed up. If you do this kind of work or know someone who does, please PM. I'm aware of the several aftermarket offerings in this area but they don't quite meet my very specific needs. Attached Images __________________ Craigslist \| ebay \| Engrishtees \| www.myattitudesucks.com \| Follow me on Twitter Last edited by Josh; 03-09-2009 at 10:05 PM. Reason: fixed it.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.