The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > S10 S15 Luv Blazer

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 03-09-2009, 01:35 PM   #1
mecwpri
Registered User
 
Join Date: Oct 2008
Location: Cheyenne, Wyoming
Posts: 9
Blazer wont start

I have a 1993 blazer 4x4 4.3 auto and it wont start. It just died on the highway the other night and now it wont start. I have pulled a plug and it has good spark so I put a fuel pressure gauge on the schrader valve at the back of the engine(Vortec) and during a start attempt it gets to around 60 psi, will hold around 45 psi overnight. If I have the wife help, it will start if I use starting fluid and then run normally, when warmed up it will start again normally but when it cools off, same problem, no start unless starting fluid is used and it seems to require a lot of starting fluid to get it going. It had a minor miss every now and again during operation but nothing that would cause me to try and fix that problem because it was not happening very often. I am thinking along the lines of a temp sensor but it might also be plugged injectors or who knows, I am not real familiar with these vortec injection systems, anybody had the same problem or recomendations on where to start troubleshooting? No check engine light or abnormal operating problems when it runs.
mecwpri is offline   Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:28 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com