![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Mar 2006
Location: Malvern, PA
Posts: 951
|
![]()
Gentlemen,
I would like some help on how to wire stock temperature gauge and vacuum gauge. The previous owner installed a SunPro temperature gauge where the stock gauge should be. I want to convert this back to stock and I figured while I'm spending the money and time doing this, I might at well upgrade the cluster to house a vacuum gauge.
![]() This is the gauge that is currently in the truck. ![]() This is temperature wire coming through the firewall. ![]() This is the wire going into the, sending unit (correct me if I'm wrong). See very center of photograph with the white teflon threads?. ![]() I have all the stock gauges and will repaint the needles. On order through www.cs-m.com I have the vacuum gauge setup (VG101 pictured below). This includes a new bezel, lens (with vac), and black faceplate (with vac). ![]()
__________________
Photo Gallery of 1972 K/5 Blazer CST |
![]() |
![]() |
Bookmarks |
|
|