NV4500 slave cylinder - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bmacd · 03-28-2009, 04:30 PM

Hello never posted before so here goes. Got a 72 4x4 on a 77 3/4 ton frame. Gm 383ht and i am putting a nv4500 behind it. Trans is out of a 95 3/4 ton pickup with an external slave cylinder. Does anyone know if the 96 and newer internal slave cylinder will bolt in. Reason I ask is my np208 is a passenger drop and i am worried about clearance between the front driveline and the slave cylinder when the suspension compresses. Any guidance would be much appreciated.

03-28-2009, 04:30 PM	#1
bmacd Registered User Join Date: Mar 2009 Location: Nampa ID Posts: 19	NV4500 slave cylinder Hello never posted before so here goes. Got a 72 4x4 on a 77 3/4 ton frame. Gm 383ht and i am putting a nv4500 behind it. Trans is out of a 95 3/4 ton pickup with an external slave cylinder. Does anyone know if the 96 and newer internal slave cylinder will bolt in. Reason I ask is my np208 is a passenger drop and i am worried about clearance between the front driveline and the slave cylinder when the suspension compresses. Any guidance would be much appreciated.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.