'83 C30 mechanical to hydraulic clutch - The 1947 - Present Chevrolet & GMC Truck Message Board Network

djackman · 04-01-2009, 12:36 AM

The clutch linkages on my '83 C30 tow / junk hauler are getting worn to the point something's going to break soon, and the clutch pedal pushing is worn to hell. I saved a complete hydro clutch setup (pedal, reinforcement rods, master, line, slave, bellhousing, fork, etc) from a '86 C30 but didn't take the pedal hanger

Looking at it now the one on my '83 looks like it hangs the pedal differently - one bolt thru both brake and clutch pedals.

Anyone used the later juice clutch setup on an older truck without changing the hanger?

04-01-2009, 12:36 AM	#1
djackman Registered User Join Date: Mar 2009 Location: New York, New York Posts: 1	'83 C30 mechanical to hydraulic clutch The clutch linkages on my '83 C30 tow / junk hauler are getting worn to the point something's going to break soon, and the clutch pedal pushing is worn to hell. I saved a complete hydro clutch setup (pedal, reinforcement rods, master, line, slave, bellhousing, fork, etc) from a '86 C30 but didn't take the pedal hanger Looking at it now the one on my '83 looks like it hangs the pedal differently - one bolt thru both brake and clutch pedals. Anyone used the later juice clutch setup on an older truck without changing the hanger?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.