newbie: Got some pics taken - The 1947 - Present Chevrolet & GMC Truck Message Board Network

andyr354 · 03-19-2003, 05:00 PM

Forgot to snap some under the hood.....
The body is rusty, but it works. The engine had been rebuilt before I got it. Has some model or RV cam in it, not shure wich one. Headers, dual exhaust with flowtech afterburners, Edelbrock 2101, Edelbrock 1406, HEI ignition, Acell shorty plugs and wires, 350 trans.
Has a factory 4row radiator that is nice for pulling. haven't looked into the gear ratio yet but it runs about 2400 rpm at 60mph.
I was able to go one stage leaner on the carb this weekend with no drivability problems so will see if that changes mileage any.

03-19-2003, 05:00 PM	#1
andyr354 Registered User Join Date: Mar 2003 Location: Mahaska, KS Posts: 82	newbie: Got some pics taken Forgot to snap some under the hood..... The body is rusty, but it works. The engine had been rebuilt before I got it. Has some model or RV cam in it, not shure wich one. Headers, dual exhaust with flowtech afterburners, Edelbrock 2101, Edelbrock 1406, HEI ignition, Acell shorty plugs and wires, 350 trans. Has a factory 4row radiator that is nice for pulling. haven't looked into the gear ratio yet but it runs about 2400 rpm at 60mph. I was able to go one stage leaner on the carb this weekend with no drivability problems so will see if that changes mileage any. __________________ 1970 C10: 2WD, LWB, 350, 350 auto, Headers, Duals, Edelbrock 1406 with 2101 intake, and optional rust.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.