Orange Boy got new Rockers! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

OrangeCrush1970 · 04-27-2009, 05:58 PM

We never claim to be pros over here at Rotten Wood Garage, but we're not scared to 'do stuff'. The key is to let your rockers rust all the way out; in my case it created a lot less work on the front end! The passenger side was first attempt, and with a lot of help from Super Dave was a success. The driver side was a little more difficult as it wasnt rusted out as bad as the passenger, but both after market rockers (Goodmark) slid right into place and needed minimal work to fit. Turned out really well, and now I boosted my trucks value a whopping $55! Feast your eyes!

04-27-2009, 05:58 PM	#1
OrangeCrush1970 Registered User Join Date: Jun 2007 Location: Smyrna, GA Posts: 709	Orange Boy got new Rockers! We never claim to be pros over here at Rotten Wood Garage, but we're not scared to 'do stuff'. The key is to let your rockers rust all the way out; in my case it created a lot less work on the front end! The passenger side was first attempt, and with a lot of help from Super Dave was a success. The driver side was a little more difficult as it wasnt rusted out as bad as the passenger, but both after market rockers (Goodmark) slid right into place and needed minimal work to fit. Turned out really well, and now I boosted my trucks value a whopping $55! Feast your eyes! Attached Images __________________ *Rottenwood Garage* 1970...71...72 C1500 aka Orange aka Sideshow Bob 540 BB Straub Roller Cam, AFR Magnums, XP 950, TKO 600 2 Tons of Fun



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.