Longbed Stepside

[special-K]

I bought the truck this bed was on mainly for the bed,when I had three 3/4t 4wds,and now don`t need it.I was going to take it apart to get parts I needed,like cross members,but decided I have most parts i need and this would be a great bed to put on a truck.You know how it goes,something is great until you pull it apart.Then,it all looks like crap.The flanges on the fender may have rust,but that doesn`t matter when it`s all together.The cross members may be scaley,but they`ll do just fine for quite awhile.When restoring,none of this is "good enough".But,take and paint this and it`ll be a great bed for quite awhile.It`s origina lpaint as well as wood floor.The steps have rust and there`s some in the top rail.The tailgate`s great and so is the front panel,as well as the rear cross sill.The whole thing is very straight and not beat up at all.Only the driver fender has some rust at the lower front...very fixable.I even have some new take-off steps I can offer as well as another short bedside that pieces can be cut from if the bed is restored.
I want $300 for the bed.$100 for the steps and $100 for the short bedside.I`m not offering anything seperate.I`m offering the bed and if the buyer wants the other stuff,it`s available.If only the bed sells,then the other parts will be available.If it`s all wanted in a package I`ll do $400.




Two cross members were weak and need replaced.I have more pictures and can get any you`d like if interested.