ECE track bar and CPP notch - The 1947 - Present Chevrolet & GMC Truck Message Board Network

2500HD · 06-07-2009, 09:55 PM

I installed a CPP bolt in notch on my truck that has an ECE 4-6 drop and adjustable track bar. The track bar hits the frame before the axle hits the bumpers in the notch. I am sure others have had this problem. my options are to add a two inch block and new 4 inch springs or add the two inch block and bags. I will be doing the bags as I planned to bag it later anyway. The bags will be operated with shrader valves for now.

I want bags that will work in the stock spring locations. I do not want to lay anything, I just want a cool stance with the ability to haul stuff.

What bags should I use?

06-07-2009, 09:55 PM	#1
2500HD Registered User Join Date: Aug 2005 Location: DFW Posts: 268	ECE track bar and CPP notch I installed a CPP bolt in notch on my truck that has an ECE 4-6 drop and adjustable track bar. The track bar hits the frame before the axle hits the bumpers in the notch. I am sure others have had this problem. my options are to add a two inch block and new 4 inch springs or add the two inch block and bags. I will be doing the bags as I planned to bag it later anyway. The bags will be operated with shrader valves for now. I want bags that will work in the stock spring locations. I do not want to lay anything, I just want a cool stance with the ability to haul stuff. What bags should I use? Attached Images __________________ 1970 Custom Original 400/400 Now ZZ454/4L80E/Edelbrock Pro-Flo 4/3:73 Eaton Posi PS PB and cold factory air Early Classic 4.5/6 Front 20X8.5 Riddler 4.75 inch bs Pirelli 255/40/20 Rear 20X10 Riddler 5.5 inch bs Toyo 295/40/40 Rear end is original wide 6 lug converted to 5 lug



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.