A couple of frame, shock and bushing questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*vegaschevy* · 06-22-2009, 03:10 PM

I bought this rolling chassis at this point.

Are these plates OEM? are they something that was added and if so why?

Also take a look at these bushings. They appear to go in from one side only like a newer i cannot remember the name but they are like NItrate or some kind of injected bushing on newer cars. Does everything look right assembled the way it is?

Also lower shock mounts, the uppers are on the cross member, im guessing the lowers are something I can purchase that go on the bottom of the u bolts?

06-22-2009, 03:10 PM	#1
vegaschevy Account Suspended Join Date: May 2009 Location: las vegas nv Posts: 1,493	A couple of frame, shock and bushing questions I bought this rolling chassis at this point. Are these plates OEM? are they something that was added and if so why? Also take a look at these bushings. They appear to go in from one side only like a newer i cannot remember the name but they are like NItrate or some kind of injected bushing on newer cars. Does everything look right assembled the way it is? Also lower shock mounts, the uppers are on the cross member, im guessing the lowers are something I can purchase that go on the bottom of the u bolts?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.