pair of 3/4 ton 4x4 hubcaps (fronts)

[cheyenne10]

These 2 3/4 ton caps are very nice. I would say they were almost NOS. Story is that the guy I got them from took a as-new pair and carefully cut the centers out to fit the hubs. (see pic with hub). When I first looked at them I did not see the cut edges. Once I spotted this my plan was to get a dremmel and carefully sand/grind these smooth (ever so slight burrs). They are a little sharp right now which also tipped me to the cuts. I have a very clean set on my burb and compared and diameter of the cut is pretty exact. I would not hesitate at all sanding these edges and putting on a show truck. 1 very small ding out near one of the tangs at opposite the black band. Even the bead on the back does not show the dents when these get mounted. You can see small yellow paint on the one near the center (cap without the hub) which I believe was a marker used to draw the circle, will easily come off. If it was me I would clean up edges and spend a 1/2 hr waxing and buffing them up. I have been known to wax the insides too to keep dust off. $75/pair + shipping.