front axle done for now - The 1947 - Present Chevrolet & GMC Truck Message Board Network

nu2-72 · 06-25-2009, 08:57 PM

You may remember I finished the t-case a couple of weeks ago. Tonight I finished assembly of the front axle.
Because there were some mods done I will now pull it out of the frame and finish the details and then reassemble. You can see the crossmember that I fabbed for the sway bar. That needs coated now that it suits me.
The hubs are done and new rotors installed.
The calipers will be cleaned and coated Blue next to go with the build colors.
I may galvanize that crossmember. Still undecided on that or Black.
All parts that could be replaced were done so with NOS.
Pretty Blue dials and Chrome rings.

06-25-2009, 08:57 PM	#1
nu2-72 Senior Member Join Date: Apr 2001 Location: Amazonia, Mo. USA Posts: 2,821	front axle done for now You may remember I finished the t-case a couple of weeks ago. Tonight I finished assembly of the front axle. Because there were some mods done I will now pull it out of the frame and finish the details and then reassemble. You can see the crossmember that I fabbed for the sway bar. That needs coated now that it suits me. The hubs are done and new rotors installed. The calipers will be cleaned and coated Blue next to go with the build colors. I may galvanize that crossmember. Still undecided on that or Black. All parts that could be replaced were done so with NOS. Pretty Blue dials and Chrome rings. Attached Images __________________ 72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.