My little long bed 62

[Captainfab]

Originally Posted by Ghostwhite

ruffrida I was in hhc 1-8 cav 2nd brigade 1st cav for 4 years.


Well I got some parts in and have been working on the truck a little. I've figured out that my tail lights not working isnt the blinker switch so I'm guessing its the under the dash wiring. Been reading through the manual a little and getting a better idea of how everything is built and I must say it must be me cause the wiring diagrams dont help me out much...

I found a donor for my clutch pedal that will solve some problems and I looked around and all the clutch return springs for hydraulic clutches are much different than mine.

I found my carb spacer to be leaking from a crack all the way through on one side and havent been able to find any kind of replacement new or used. any suggestions?

I'm gonna have new exhaust from the manifold back and am debating on where to have it exit... I wanna keep it in front of the rear axle for clearance purposes when I lower it in the future. Opinions welcome!!

If you are talking about the base plate of the carb, you may need to just get it welded.