Need Help, A-arm bushings and cross shafts

[chevy_mike]

Hi guys,

So I finally got my A-arms put on last night.



I replaced all of the bushings and cross shafts as the original ones had too much play in them.

Problem I am having is, the pass. side rotate up and down easily, as I would expect them to. The driver side, the arms are very stiff to move. I am assuming this is due to the bushings being a little too tight and causing a slight bind.

Would this be a correct assumption and would backing off the bushings slightly solve this? Any other ideas or tricks?

I have replaced bushings before, just not this style before. Thanks!