Started working on my s10 frame swap today!

[andrewt2]

As the title says started working on my 1948 gmc truck to s10 swap today. i wanted to get the truck as low as possible so i decided not to raise it off the frame at all. I drilled out the rivets on the factory 1948 mounts and intend to weld them to the s10 rails. the cab is sitting where it needs to be and the front clip was mounted today. My s10 is a short bed so i will have to shorten my bed a bit to get the rear wheels center in the wheel well. the bed is just sitting on there now for easier storage but here are a few pictures!