New here, have some questions.

[moldymac]

Hi everyone. I have 2 C-series Chevys and am in need of some help, really happy I found this board. Let me start by introducing my fleet. The first one on the left is my 85' C20 dually with the 2bbl 305 with 106k miles, which has been in the family for 2 years and became mine a few years ago. The other one on the right is an 82' C30 dually with a 350 4bbl and a 3 speed manual with granny gear (was a wrecker in its earlier days), currently has an unknown milage, shows 56k, but rolled over once or twice. It currently is a work in progress. I traded a beat lawn tractor for it! I recently picked up a dually bed for it to replace the ugly home made bed thats on it now(the new bed is upside down on my 85').



My question is about the 82 C30. The previous owner cut all the vacuum lines out and plugged them with screws. I',m trying to get enough of the lines in to get the major components working like the spark advance on the dist, the climate control, and the choke. The brakes are hydroboost, which leaks and still needs work. I followed the diagram on the air cleaner, but its not too helpful as some parts seem to just end at what seems no where. does anyone have a picture of what the routing is suppose to look like? Also, I have not looked under the rear yet, but has anyone ever removed a wrecker bed off one of these? I don't see any bolts in the bed, but there are steel plates welded everywhere in it. Thanks!