antifreeze in distributor hole - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*vegaschevy* · 08-18-2009, 02:05 PM

My truck is in the driveway right now and when i pulled the intake off the truck it poured antifreeze into the distributor hole. I thought it was drained low enough but with the slant of the driveway it stayed at the back. If I finish installing my intake and carb I can drain the oil before starting and it will be ok correct? I searched and could not find anything but cannot see how it would be to bad.

Am I wrong in thinking this?

08-18-2009, 02:05 PM	#1
vegaschevy Account Suspended Join Date: May 2009 Location: las vegas nv Posts: 1,493	antifreeze in distributor hole My truck is in the driveway right now and when i pulled the intake off the truck it poured antifreeze into the distributor hole. I thought it was drained low enough but with the slant of the driveway it stayed at the back. If I finish installing my intake and carb I can drain the oil before starting and it will be ok correct? I searched and could not find anything but cannot see how it would be to bad. Am I wrong in thinking this? Last edited by vegaschevy; 08-18-2009 at 02:06 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.