![]() |
![]() |
#1 |
Registered User
Join Date: Mar 2009
Location: CA
Posts: 813
|
BBW Conversion
I am going to start a thread on how to do the above mentioned w/ step by step pictures. I am currently debating what will be the easiest way to do this. I have discussed this with a few people who have already done a conversion and have a general idea on what needs to be done. It was a real pain in the @$$ getting all the spot weld drilled out of the donor panel and do not want to do it again on getting the small window panel out. I have came up with cutting both panels in the same locations and welding it in.
I want to cut 1" or 1.5" below the seam the screwdriver is pointing at. This is the driver side. ![]() Passenger, again 1" or 1.5". ![]() ![]() I want to do the same thing all the way around, get the idea? ![]() To me it just seems easier doing it this way rather then drilling the welds and gring them smooth and risk damaging the outer skin. Please comment with any ides, concerns or comments. I want to make a thread as a reference for anyone who wants to do this since there isnt one made yet. |
![]() |
![]() |
Bookmarks |
|
|