POR-15 Brushers step inside please

[C10Slim]

Originally Posted by Hilandr451

I brushed all my POR-15 on. The self leveling thing really works!

Here's some tips I have learned from my experience with the stuff:

[*]
Unlike other surface treatments, POR-15 cures by removing moisture from the air, so suffice it to say the curing time is inversely proportional to the amount of moisture in the air - in other words: High Humidity = Short Curing Time[*]
I have had the best results and quickest curing time under high humidity. A good rainy day outside with the grage door open about 18" works great, but if you don't want to wait for the rain, just pour a gallon or two of water on the shop floor (preferably directly under your project) after you finish painting and it will do the trick.

Well this is one thing that actually has me conserned. Being in Houston we always have HIGH humidity we have been at 80%+ for months! I am worried it will actually dry too fast. I am going to wait until Sept to paint so hopefully we will get a couple of cooler lower humidity days.

Thanks for the post lost of good tips in there!