Finally Finished my 462ci Build - The 1947 - Present Chevrolet & GMC Truck Message Board Network

vin63 · 08-27-2009, 04:34 PM

Here's my 462ci that will go into my '63 C-10. Did the break-in this week, and will be getting ready for some 6000 rpm dyno pulls soon. On the last 5000 rpm pulls, it made (with no correction factor) 517 bhp at 5000 rpm and 580 ft-lb at 4200 rpms.

Thanks to David Basham of BMS Machine for the great machine work, and to Jeff Kauffman of Kauffman Racing Equipment for all of the trick parts and components. Eddie Leabo of Performance Carburetors built the 750 carb and Machine Tech Racing Engines is doing the break-in, tuning and, eventually, dyno pulls.

On the warm up stand...

08-27-2009, 04:34 PM	#1
vin63 It's Better With Nitro Join Date: Apr 2008 Location: Chino Hills, CA Posts: 2,262	Finally Finished my 462ci Build Here's my 462ci that will go into my '63 C-10. Did the break-in this week, and will be getting ready for some 6000 rpm dyno pulls soon. On the last 5000 rpm pulls, it made (with no correction factor) 517 bhp at 5000 rpm and 580 ft-lb at 4200 rpms. Thanks to David Basham of BMS Machine for the great machine work, and to Jeff Kauffman of Kauffman Racing Equipment for all of the trick parts and components. Eddie Leabo of Performance Carburetors built the 750 carb and Machine Tech Racing Engines is doing the break-in, tuning and, eventually, dyno pulls. On the warm up stand... __________________ 1963 C-10: Deluxe-optioned cab, shortbed, fleetside Pontiac 462 ci, Kauffman D-Port alum. heads 4L80E, narrowed sheetmetal Ford 9-inch Tubular front and rear suspension Custom 6-piston front disc and 4-piston rear disc brakes



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.