72 truck, 85 NP208 TC and shifter dilema

[72lb4x4]

I have a 72 K10 with a 4 speed and NP208 from an 85 truck due to a PO's somewhat less than infinite wisdom. It also has the crappy shifter from the 85.

This piece of junk sort of (in my case) bolts to the floor and has a nasty plastic console thing that lays pathetically over it.

It seems that the TC shifter should/would mount to the TC adapter, but in this case, there are no bolt holes.

I've been eying a few shifters on Dodge 4x4s in it scrap yard, and bought a shifter here for a 205, that I think is actually for a 203, but there's no easy way to mount them.

So after that windy introduction, does anyone have any shifter recommendations? I have searched the internet and checked on 4x4 aftermarket web sites but haven't found anything but twin stick setups, which aren't for a 208.

I'm an orphan. Apuva! (the finns, if any will laugh at that)