![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Oct 2003
Location: Central Vermont
Posts: 8,538
|
Blazer Quarter Fix - Using SWB Bedsides
Just replaced my blazers quarter panels with SWB bedsides but did it a little different than swapping everything over.
I re-used the original blazer inner bedside and the outer skin from a SWB pickup bedside. Went this route for a couple reason's. 1) With the cage I couldn't access any of the body bolts 2) Wasn't able to access the wheel well housing bolts either due to a different mod. 3) Decided it was easier to keep the 'b' pillar intact. Started here with some very rough bedsides: ![]() Cut off the outer and was pleased to find a nice straight inner: ![]() The SWB bedside I used: ![]() Here's the difference between the two: ![]() ![]() Kept enough of the original bedrail tops to retain the hard top bolt holes. (I highly recommend it) ![]() Stitching in where the stake pocket was: ![]() The long slice: ![]() Test fit: ![]() |
![]() |
![]() |
Bookmarks |
|
|