Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
09-01-2009, 12:28 AM | #1 |
Eat My Rust
Join Date: Jan 2007
Location: Cypress, Texas
Posts: 3,362
|
McGyvering the throttle linkage... Sweeet
My throttle cable snapped when turning off huffmiester onto cypress church. Hit the gas, and the pedal fell off (not uncommon, my gas pedal isn't properly mounted), so I goto put it back on, and hit the gas, but it's on teh floor! Take the pedal off, and hit the throttle arm, and it's on the floor! I idle over to a gravel road, and pop the hood. My dad suggests over the phone to use a shoes string. Tied a loop around the throttle arm, and tied a knot on the carb's throttle plate. The shoe string stretched so much that top speed was 40 miles per hours, and it took nearly a minute to reach there... You could say I had good MPG!
My dad and neighbor's suggestion for a better temp fix, a coat hanger... and... Hey, the throttle is more responsive than it was with the stock cable!!! Time to look into a linkage setup. "Shoe String Budget" Where's a cheap cable replacement, or even a cheap universal linkage setup I can get? |
Bookmarks |
|
|