*CUCV Axle Questions*

[LeftCoast32]

I have a chance to grab up a matching set of CUCV Axles (Dana 60/14 Bolt).

I was under the impression that the axles would be a bolt in. Everything I read says the spring center to spring center should be 32" on the CUCV Dana 60 Axle.

I have some measurements below.

'66 Axle Measurements (I measured these)
Front Closed Dana 44 = 31.5" spring center to spring center
Rear 12 Bolt = 40" spring center to spring center

CUCV Axle Measurements (I got these measurements from seller)
Front Dana 60 = 34" spring center to center, 69" wheel mounting surface to wheel mounting surface
Rear 14 Bolt = 40" spring center to center, 67" wheel mounting surface to wheel mounting surface